The Euromix

Chemplant Stainless Ltd.
CHEMPLANT STAINLESS

Sigma Duplex Blender

The Euromix is an improved version of the 'Z' Blade mixer, ideal for handling the blending of viscous products such as dough and pastes. The tilting trough shape allows for easy discharge of thick products and the specially designed blades give a uniform blend.

 

Description

Features

 

Description

  1. All Stainless Steel Construction

  2. Stainless steel specially shaped Z Blades

  3. Hydraulic Tipping Gear

  4. Helical Gears

  5. Excellent Blending

  6. High Standard of Cleanliness

  7. Convenient to Operate

  8. Accessible for Maintenance

 

Shows agitation.

Click on these small pictures to see larger versions

Shows motor

 

All STAINLESS STEEL HYGIENIC CONSTRUCTION

 

Features and Extras

  • PAN
    Very rigid construction of the Euromix special shape in all stainless steel. A raised extension is available to give a deeper pan if required.
  • JACKET
    Can be supplied with hot/cold water or steam jacket to suit the application.
  • VACUUM VERSION
    Incorporates special seals and lid with or without jacket, to eliminate batch air entertainment and increase product integrity.
  • MIXER BLADES
    Cast stainless steel with stainless spindles. The shape and throw has been evolved to suit the blending of, dough, paste, powders and granules etc.

  • BEARINGS
    Smooth external surfaces with no dirt pockets. Tapered roller races, grease lubricated. Ample dimensions for heavy duty and long life.

  • FRAME
    All stainless steel construction in plate and tube. Light but very rigid.
  • SEALS
    Mechanical seals or packed glands are available for the mixer spindle.
  • HYDRAULIC LIFTING GEAR
    A ram at each end raises and lowers the pan. Oil is fed to them from a motor driven pump unit housed under the motor cover. When the pan reaches the required position a relief valve bypasses the oil to the sump. An internal spring in the ram acts as a buffer. All working parts are made in stainless steel. No danger can be done by "over-run".
  • DRIVE
    Standard drive is by vee ropes.
  • GUARDS
    A cover encloses the main vee rope drive. This gives complete protection and is light to remove, giving clear access for inspection and maintenance.

 

SPECIFICATION
Capital Motor 15hp to 50hp  
Working capacity 500 ltrs
Blender pulley diameter 0.50m. (1 ft 8 in)
Vee ropes 15. 9m (8 x 5/8 in wide)
Hydraulic tipping    
Motor 3hp  
Oil NUTO H40
Sump holds 36.6 Ltr (8 gal)
Time to lift pan 30 seconds  
Overall width 2250 (7'-6")
Overall width with motor 2850 (9'-6")
Overall depth 1800 (6'-0")
Maximum height of pan 975 (3'-3")
Height to front edge of pan when tipped 775 (2'-7")
Clearance under pan lip when tipped 725 (2'-5")
Overall height when tipped 2100 (7'-0")
Weight 1778kg (39201b)

 

Return to the top of the page

 Process
Equipment
Index		 Return to the main contents page

Manufacturer has rights to change design and dimensions. The above information can only be taken as a guide.

All images, sketches and other content on this website are protected by copyright.

How to contact us

Any comments or complaints on the design or content of this page, please contact:
edward@chemplant.co.uk